|08th Dec 2017|
CuP Alloys on the road again in 2018.
In 2018 CuP Alloys will be taking their talk 'Everything you wanted to know about Brazing and Soldering - but were afraid to ask' aroung the Clubs and Societies.
As I write the calendar is as follows;
10.01.18 - High Wycombe. 07.04.18- Lambeth. 16.04.18- Peterborough. 17.04.18- Grimsby. 21.05.18- Canterbury.
As usual after the talk there will be a selection of Brazing and Soldering materials and equipment to purchase at discounted prices.
If you are a member of any of the above Clubs or Societies please come along. If you are in the area and are not already a member, why not? We are sure you would be welcome on the night for the price of admission.
Any questions or requests for further talks please do not hesitate to contact us.
|21st Sep 2017|
As one of the world's most knowledgeable persons on the subject of Soldering and Brazing, it was only a matter of time until Keith Hale wrote a book on the subject! This modern, up to date guide entitled 'Your Guide to Brazing and Soldering - Everthing you wanted to know about Soldering but were afraid to ask' will be on sale at the Midlands Exhibition from the CuP Alloys stand.
|06th Feb 2017|
Would your Club like a talk on Brazing?
Contact us for more details.
Members are able to purchase materials at the reduced exhibition prices,
The presentation lasts approx 90 mins plus a q+a session,
The above picture was taken at Bradford MES and shows Keith preparing to deliver his talk on silver soldering,
The talk explains what you need to do, why you have to do it and how to do it, to silver solder successfully.
CuP Alloys - UK's #1 supplier of silver solder to the model engineer
|20th Jan 2017|
Celebrating 21 years of the London Model Engineering Exhibition Congratulations Meridienne
|21st Sep 2016|
NOT MY WORDS!!!
I just wanted to write and tell you all that I think the 455 is absolutely fantastic. I restore vintage espresso coffee machines and the solder works great on the pipe fittings and boilers. But it is also brilliant for repairing body panels, brass castings etc...the best way I can think of to describe it, is that it is very smooth, so sanding it, blending it in and polishing it ready for the chrome platers is now very easy. No pits or gassy bubbles. And obviously no panel distortions due to the low heat.
A great product!
|21st Sep 2016|
Look out for us at The Midlands Exhibition in our 'new' old spot, Stand 2 just left of the entrance.
|18th Jul 2016|
There has been a lot of talk amongst Model Engineers lately about controling the joint gap during brazing.
To this end we have added to the FAQ's 'How to control the joint gap|'
We hope this new information is of interest and solves any potential problems. But as always we are the end of the phone or on email to assist where required.
|02nd Jun 2016|
BSMEE Thornbury Exhibition 2016.
Once again CuP Alloys will be exhibiting at Thornbury 19th to 21st August having available all the silver solder, soft solder and sievert heating equipment you the Model Engineer may need, at special exhibition prices.
All products will be available in quantities to suit your needs and at prices to suit the pocket.
While looking and admiring the skills of your contemporaries, take the opportunity to discuss your project.
Could you improve your brazing technique? See the range of Sievert burners that could improve your efficiency and improve the quality of your joints.
As part of our continued commitment to the Model Engineer and the Model Engineering Exhibitions,and in a new initiative for Bristol, we will be presenting a talk each day of the exhibition entitled 'Silver Soldering made Easier'.
Over 100 years of brazing experience available to answer any technical brazing or soldering question on the stand.
Lots to see and do at Bristol!
CuP Alloys, the #1 supplier of silver solder to the Model Engineer
|20th May 2016|
All set at the Doncaster Exhibition What a fabulous venue
|11th May 2016|
HOT OFF THE PRESS.
Once again Meridienne Exhibitions have secured Keith to deliver his lecture at the Midlands in October. Keith will be speaking at 12 noon on the Thursday and Friday,and 3pm on Saturday. These lectures are always well received and popular so please ensure you get your seat early!!
|Entries : ( 35 ) prev next|